Box of Wheels

Free, two sets of rims/wheels with bonus tires and 10" Ryobi Tablesaw

1) Two 27.5 Stans ZTR Flow rims, 21mm inner width. Taped for tubeless. @mike tested and approved. Also two Pacenti tires one half worn , the other more than half, good stanimals inside.

2) 26" Shimano XT wheelset. Centerlock. UST. 21mm inner width rims. front 20mm axle not convertible. Rear has a bearing issue and needs to be rebuilt. 9mm QR. Four tires, DHF, DHR2, Highroller2, all 2.3 Exo/TR, and a Hans Dampf 2.35. All have 50% ish tread

Bonus, 10" Ryobi Tablesaw. Works. Pretty much no safety equipment on it, no cover/guide over the blade, take and use at own risk

PM me if you want them, if nothing more than to hang them on your garage wall as antique/conversation starters. I can deliver to a trailhead in mid or south OC. I'll give them a week here and then they're going away

 

Nice loot!!!

Those Flows were well loved and not abused, rode em on my El Bastardo then my Bronson until I got the Derbys, which the weez now rides on a Bronson.

 

Does the Table Saw work and relatively cuts straight?
I need a little table saw like that!
I had to sell my shop table saw when my construction firm had to liquidate.
I got a few little projects to do over at the church and that would be perfect-o!

 

I'd love all the 26" stuff as I have a family fleet still on 26".
I'll pm my info.

 

I just fired it up @Mikie , it cuts fine. Blade doesn't wobble. Just have to make sure the guide is square with the blade. I think I got a new blade for it the last project I used it on a few years ago.

 

Make him drive down for a group ride...

 

Awesome! Consider that snagged... THANK YOU!

Oh, like THAT’S hard to do...
Be happy to come down.

 

I'll take the Stans flow wheels if still available?

 

26" stuff is spoken for, as is the table saw.
@Mikie how about Saturday, April 13th?

 

I am the M.C. at the Vine Pregnancy Center Spaghetti Fund Raiser Dinner that afternoon in Frazier Park as "Luigi" the cheesy Italian cook.

How about the following Saturday April 20th?
Maybe we can do a 2fer ride and do one in the morning and then one on the Fullerton loop with @Grego in the afternoon cuz I want that FN Secret Burger!

 

mamamia Luigi. I'm already booked on the the 20th, but maybe could drop the saw at a trailhead if you can find someone else to ride with down here Or 27th looks clear.

 

Rwanda is on the 27th... @Mikie - Are you coming down again for Rwanda?

 

Not as a vendor. Is it too late to sign up as a rider?

 

No.
https://therideforrwanda.redpodium.com/rwanda-ride-2019

 

The 75 would be a great training ride for you and @Voodoo Tom .

 

If it helps, I could always meet Mr. @knucklebuster and get the saw for you and hang on to it until Rwanda...

@Mikie

 

Gee I was thinking the 25...
No actually the 50 would be just fine...

 

The 50 is probably the easiest 50 around... I think the 75 would be a great distance for you.

 

Where is the emoji with the horns...?
(fixed as best I could for you...)